產品詳情
簡單介紹:
本于紙和紙板短距壓縮強度試驗。微電腦控制、液晶中文顯示,具有測試數據統計處理功能,可打印輸出
This paper and paperboard short compression strength test. Microcomputer control, LCD Chinese display, with test data processing function, can print out
詳情介紹:
主要技術性能
Main technical performance
1. 測量范圍:
2. 壓力5~500N
3. 試驗速度:3±1mm/min
4. 準確度:±1%;
5. 試樣夾自由間距:(0.70±0.05)mm;
6. 試樣夾持力:(2300±500)N;
7. 儀器工作壓力:(0.53±0.07)MPa;
8. 電源:AC 220V±22V,50Hz;
9 .重量:51㎏
10. 空氣壓縮機:用戶自己配置。
1. Measuring range:
2. 5 ~ 500 n
3. Test speed: 3±1mm/min
4. Accuracy: ±1%;
5. Free spacing between samples :(0.70±0.05) mm;
6. Sample clamping force :(2300±500) N;
7. Operating pressure of the instrument :(0.53±0.07) MPa;
8. Power supply: AC 220V±22V, 50Hz;
9 weight: 51㎏
1、Touch screen 2、Test button 3、Calibration support 4、Pressure regulating valve
5、Pressure gauge 6、The printer 7、Sample clamp 8、Calibration connector
Display "welcome to use", do not touch the upper pressure plate at this time, so as not to affect the sensor boot self-calibration. After a few seconds, the instrument automatically enters the test interface
夾持長度:30±0.5 mm
Clamping length: 30± 0.5mm
測試速度:3±0.1 mm/min.
Test speed: 3± 0.1mm /min.
精度:0.15N,0.01kN/m
Precision: 0.15n, 0.01kn /m
電源:220 VAC,50/60Hz
Power supply: 220 VAC, 50/60 hz
氣源:0.5MPa
Source: 0.5 MPa
Main technical performance
1. 測量范圍:
2. 壓力5~500N
3. 試驗速度:3±1mm/min
4. 準確度:±1%;
5. 試樣夾自由間距:(0.70±0.05)mm;
6. 試樣夾持力:(2300±500)N;
7. 儀器工作壓力:(0.53±0.07)MPa;
8. 電源:AC 220V±22V,50Hz;
9 .重量:51㎏
10. 空氣壓縮機:用戶自己配置。
1. Measuring range:
2. 5 ~ 500 n
3. Test speed: 3±1mm/min
4. Accuracy: ±1%;
5. Free spacing between samples :(0.70±0.05) mm;
6. Sample clamping force :(2300±500) N;
7. Operating pressure of the instrument :(0.53±0.07) MPa;
8. Power supply: AC 220V±22V, 50Hz;
9 weight: 51㎏
10. Air compressor: user's own configuration.
1、Touch screen 2、Test button 3、Calibration support 4、Pressure regulating valve
5、Pressure gauge 6、The printer 7、Sample clamp 8、Calibration connector
顯示“歡迎使用”,此時不要接觸上壓板,以免影響傳感器開機自校準。幾秒鐘后儀器自動進入試驗界面
Display "welcome to use", do not touch the upper pressure plate at this time, so as not to affect the sensor boot self-calibration. After a few seconds, the instrument automatically enters the test interface
夾持長度:30±0.5 mm
Clamping length: 30± 0.5mm
測試速度:3±0.1 mm/min.
Test speed: 3± 0.1mm /min.
精度:0.15N,0.01kN/m
Precision: 0.15n, 0.01kn /m
電源:220 VAC,50/60Hz
Power supply: 220 VAC, 50/60 hz
氣源:0.5MPa
Source: 0.5 MPa