歡迎來到深圳市弘基嘉科技有限公司
主營產品：
恒溫恒濕箱，冷熱沖擊箱，鼓風干燥箱，高低溫試驗箱，拉力試驗機，鹽霧測試機、換氣老化試驗箱、搖擺測試機、耐摩擦試驗機、插拔力試驗機、模擬汽車運輸振動試驗機、密度計等等測量?jī)x器.
產品詳情
簡單介紹：
用途：紙箱抗壓試驗機是一款專業用于測試紙箱抗壓性能的試驗機，適用于瓦楞紙箱、蜂窩板箱等包裝件的耐壓、形變、堆碼試驗。并兼顧塑料桶（食用油、礦泉水）、紙桶、紙盒、紙罐、集裝容器桶（IBC桶）等容器的抗壓試驗。
Carton compression testing machine is a professional test box compression performance testing machine, suitable for corrugated carton, honeycomb board box and other packaging parts of the pressure, deformation, stacking test. The pressure test of plastic bucket (edible oil, mineral water), pa
詳情介紹：
標準
GB/T 4857-4 包裝 運輸包裝件基本試驗 第4部分：采用壓力試驗機進行的抗壓和堆碼試驗方法
ISO 12048 包裝--裝滿的運輸包裝--使用壓縮試驗機進行壓縮和堆垛試驗
ASTM D642 測定集裝箱及部件抗壓強度和單位載荷的試驗方法
ASTM D4169 船運集裝箱和設備的性能試驗規程
TAPPI T804 纖維板集裝箱壓縮試驗
JIS Z0212 包裝貨物和集裝箱.壓縮試驗方
standard ：Packaging - basic tests for transport packages - part 4: methods of compression and stacking test using a pressure testing machine
ISO 12048 packaging -- full shipping packaging -- compression and stacking tests using compression testing machines
ASTM D642 test method for determination of compressive strength and unit load of containers and components
ASTM D4169 code for testing the performance of shipping containers and equipment
TAPPI T804 fiberboard container compression test
Packed goods and containers JIS Z0212. Compression tester
3，試驗介紹
基礎應用 紙箱壓潰試驗 用于測量瓦楞紙箱、蜂窩紙箱等試樣被壓潰時的力值
紙箱堆碼A試驗 用于測量在瓦楞紙箱、蜂窩紙箱等試樣上堆碼時，試樣的變形量
紙箱堆碼B試驗 用于測量瓦楞紙箱、蜂窩紙箱等試樣在一定時間內、承受某力值時發生的變形量是否在合格范圍內
擴展應用 中空容器壓潰試驗 用于測量中空容器等試樣被壓潰時的力值
中空容器堆碼A試驗 用于測量在中空容器等試樣上堆碼時，試樣的變形量
中空容器堆碼B試驗 用于測量中空容器等試樣在一定時間內、承受某力值時發生的變形量是否在合格范圍內
Test is introduced
Basic application of the carton collapse test is used to measure the corrugated carton, honeycomb carton and other samples when the collapse of the force
Carton stacking A test is used to measure the deformation of samples when stacking on corrugated boxes, honeycomb boxes and other samples
Carton stacking B test is used to measure whether the deformation of corrugated carton, honeycomb carton and other samples under a certain force in a certain time is within the qualified range
The expanded application of crushing test of hollow container is used to measure the force value when the hollow container sample is crushed
The stacking A test of hollow container is used to measure the deformation of samples when stacking on hollow container
The stacking B test of hollow container is used to measure whether the deformation of hollow container and other samples under a certain force in a certain time is within the qualified range
4，功能：定荷重，定位，定位移，定時間。
荷重元：1000kg
動力系統：DC馬達； 感應方式：高精度荷重元
解析度：1/200000.控制系統：定速10，20，30，40，50，100mm/min；無段調速10至100mm/min
測試空間：測試寬100cm，聯板行走空間約100cm
壓板尺寸： 800mm*600mm ，（可按客戶定制）
顯示方式：LED顯示或電腦主機
**裝置：
過載，緊急停機裝置
上下行程限定裝置
試驗完成自動停機裝置、12、測試區域：100＊100＊100cm；
紙箱抗壓試驗機設計之初衷為測試紙箱之耐壓強度，以防范因紙箱強度不夠?qū)е庐a(chǎn)品在使用、搬運、堆疊、倉儲、運輸過程中產品變形、損壞之**現象發生。
Function: fixed load, location, location shift, fixed time.
2. Load yuan: 1000kg
3. Power system: DC motor; Induction mode: high-precision load yuan
Control system: constant speed 10,20,30,40,50,100 mm/min; Stepless speed adjustment of 10 to 100mm/min
5. Test space: the test width is 100cm, and the joint plate walking space is about 100cm
6. Pressing plate size: 800mm*600mm (customizable)
7. Display mode: LED display or computer host
8. Safety device:
9. Overload and emergency shutdown device
10. Upper and lower stroke limiting device
11. Automatic stop device after the test. 12. Test area: 100 * 100 * 100cm;
The original purpose of the carton compression tester is to test the compressive strength of the carton, so as to prevent the product from deformation and damage during use, handling, stacking, storage and transportation due to the insufficient carton strength.
GB/T 4857-4 包裝 運輸包裝件基本試驗 第4部分：采用壓力試驗機進行的抗壓和堆碼試驗方法
ISO 12048 包裝--裝滿的運輸包裝--使用壓縮試驗機進行壓縮和堆垛試驗
ASTM D642 測定集裝箱及部件抗壓強度和單位載荷的試驗方法
ASTM D4169 船運集裝箱和設備的性能試驗規程
TAPPI T804 纖維板集裝箱壓縮試驗
JIS Z0212 包裝貨物和集裝箱.壓縮試驗方
standard ：Packaging - basic tests for transport packages - part 4: methods of compression and stacking test using a pressure testing machine
ISO 12048 packaging -- full shipping packaging -- compression and stacking tests using compression testing machines
ASTM D642 test method for determination of compressive strength and unit load of containers and components
ASTM D4169 code for testing the performance of shipping containers and equipment
TAPPI T804 fiberboard container compression test
Packed goods and containers JIS Z0212. Compression tester
3，試驗介紹
基礎應用 紙箱壓潰試驗 用于測量瓦楞紙箱、蜂窩紙箱等試樣被壓潰時的力值
紙箱堆碼A試驗 用于測量在瓦楞紙箱、蜂窩紙箱等試樣上堆碼時，試樣的變形量
紙箱堆碼B試驗 用于測量瓦楞紙箱、蜂窩紙箱等試樣在一定時間內、承受某力值時發生的變形量是否在合格范圍內
擴展應用 中空容器壓潰試驗 用于測量中空容器等試樣被壓潰時的力值
中空容器堆碼A試驗 用于測量在中空容器等試樣上堆碼時，試樣的變形量
中空容器堆碼B試驗 用于測量中空容器等試樣在一定時間內、承受某力值時發生的變形量是否在合格范圍內
Test is introduced
Basic application of the carton collapse test is used to measure the corrugated carton, honeycomb carton and other samples when the collapse of the force
Carton stacking A test is used to measure the deformation of samples when stacking on corrugated boxes, honeycomb boxes and other samples
Carton stacking B test is used to measure whether the deformation of corrugated carton, honeycomb carton and other samples under a certain force in a certain time is within the qualified range
The expanded application of crushing test of hollow container is used to measure the force value when the hollow container sample is crushed
The stacking A test of hollow container is used to measure the deformation of samples when stacking on hollow container
The stacking B test of hollow container is used to measure whether the deformation of hollow container and other samples under a certain force in a certain time is within the qualified range
4，功能：定荷重，定位，定位移，定時間。
荷重元：1000kg
動力系統：DC馬達； 感應方式：高精度荷重元
解析度：1/200000.控制系統：定速10，20，30，40，50，100mm/min；無段調速10至100mm/min
測試空間：測試寬100cm，聯板行走空間約100cm
壓板尺寸： 800mm*600mm ，（可按客戶定制）
顯示方式：LED顯示或電腦主機
**裝置：
過載，緊急停機裝置
上下行程限定裝置
試驗完成自動停機裝置、12、測試區域：100＊100＊100cm；
紙箱抗壓試驗機設計之初衷為測試紙箱之耐壓強度，以防范因紙箱強度不夠?qū)е庐a(chǎn)品在使用、搬運、堆疊、倉儲、運輸過程中產品變形、損壞之**現象發生。
Function: fixed load, location, location shift, fixed time.
2. Load yuan: 1000kg
3. Power system: DC motor; Induction mode: high-precision load yuan
Control system: constant speed 10,20,30,40,50,100 mm/min; Stepless speed adjustment of 10 to 100mm/min
5. Test space: the test width is 100cm, and the joint plate walking space is about 100cm
6. Pressing plate size: 800mm*600mm (customizable)
7. Display mode: LED display or computer host
8. Safety device:
9. Overload and emergency shutdown device
10. Upper and lower stroke limiting device
11. Automatic stop device after the test. 12. Test area: 100 * 100 * 100cm;
The original purpose of the carton compression tester is to test the compressive strength of the carton, so as to prevent the product from deformation and damage during use, handling, stacking, storage and transportation due to the insufficient carton strength.